
Before a single brick is laid, every building in Tamil Nadu needs two approvals: planning permission, which checks that the building fits the land use and development rules, and a building permit, which allows construction to start. Getting them right first time saves weeks, and building without them can lead to sealing, penalties or demolition.
This guide explains who approves what, the three routes now available, the documents to keep ready and what the rules expect from the professionals who sign your drawings. It is based on the Tamil Nadu Combined Development and Building Rules, 2019, as amended, and government orders checked in November 2026. Rules change, so confirm the current position on the official portal before you apply.
Who approves your building
Under Rule 5 of the building rules, the authority depends on where your plot is:
- Chennai Metropolitan Area: planning permission comes from the Chennai Metropolitan Development Authority (CMDA), or from a local body to which CMDA has delegated the power.
- Rest of Tamil Nadu: planning permission comes from the planning authority delegated by the Directorate of Town and Country Planning (DTCP), including the Local Planning Authorities around the larger cities.
- Building permit: issued by the executive authority of the local body: the corporation, municipality, town panchayat or village panchayat.
Local bodies now approve most ordinary buildings themselves. Under G.O. Ms. No. 180 of October 2026, corporations and municipalities can approve residential buildings up to 1,500 sq m of floor area and 16 dwelling units, and town panchayats and rural local bodies up to 1,200 sq m and 12 units, in each case up to 14 m high (G+2 or Stilt+3). Commercial buildings up to 500 sq m can also be approved locally. Larger buildings go to DTCP or CMDA.
One portal for every application
Since 1 April 2025, planning permission applications across Tamil Nadu are filed on the state single-window portal, onlineppa.tn.gov.in, which also handles building permits and completion certificates. The applicant is the owner, lessee or power-of-attorney holder, who applies online with the drawings and documents and pays the prescribed fees through the portal.
Three routes to approval
- Self-certification (instant): for small houses on eligible plots: plot up to 2,500 sq ft, floor area up to 3,500 sq ft, at most two dwelling units, G+1 or Stilt+2 up to 10 m (G.O. Ms. No. 118 of 2025). The owner certifies compliance and the permit is issued online straight away. See our guide to self-certification building approval.
- Third-party certification: introduced by G.O. Ms. No. 179 of October 2026 for residential buildings up to 750 sq m, 14 m and 8 units. A registered architect or Grade I registered engineer inspects the site and certifies the plan, which must pass online scrutiny as a .dxf or .dwg file.
- Regular planning permission: for everything else. The plan is scrutinised by the authority before approval.
Documents to keep ready
The portal’s own checklist for building plan approval asks for the following. Requirements can change, so check the list on the portal when you apply.
- The building plan as a .dxf drawing file, prepared to the building rules.
- A sketch showing the width of the access road.
- A copy of the plot or layout approval, or the regularisation order for the plot.
- Land ownership documents (such as the sale deed) and photographs of the site.
- The application forms the portal generates, including the owner’s application and the registered professionals’ undertaking.
- Other land records such as the encumbrance certificate, patta, adangal and field measurement book (FMB) sketch, which the portal lists as supporting documents.
Rule 8 also requires a key plan, a topo plan and a site plan showing the plot, the building and its surroundings. Most delays come from land documents: a patta not in the applicant’s name, an unapproved layout, or a mismatch between the deed and the site. Sort these out before the drawings are prepared.
Who must sign your drawings
Under Rule 8(5), as amended in March 2024, the professionals required depend on the size of the building:
- Non-high-rise buildings up to 14 m: a registered architect or a registered engineer.
- Buildings above 14 m and up to 18.30 m: in addition, a registered structural engineer, a registered construction engineer and a geotechnical engineer.
- High-rise buildings: in addition, a registered quality auditor.
Where structural design comes in
For small buildings up to 14 m, Rule 51 does not ask you to submit detailed structural drawings with the application. Instead, the registered engineer or architect certifies that the structural design follows the latest Indian Standard codes and the National Building Code. The rules therefore expect a real structural design to exist even when nobody asks to see it.
For a house that means foundations sized for your soil, columns, beams and slabs designed for the actual loads and for your seismic zone, and drawings the contractor can build from. If you plan to add a floor later, the foundation and columns must be designed for it now. Our structural design service covers exactly this, and a BOQ from the same drawings lets you compare contractor quotes fairly.
Larger buildings carry more formal duties. Above 14 m, the registered structural engineer submits a structural design basis report, inspects key stages, and gives a structural safety certificate at completion. Rule 52 also requires the plinth to be at least 45 cm above the ground and above the notified maximum flood level in flood-prone areas.
After approval
- Validity: the building permit is valid for five years from issue and can be extended once for three years if you apply before it expires (Rule 14).
- Build to the approved plan. Extra floors, rooms on the terrace or reduced setbacks take the building outside its permit.
- Completion certificate: not required for residential buildings up to 14 m with no more than 8 units or 750 sq m (Rule 20, as amended). Larger buildings need one before service connections; at that stage the portal asks for a structural stability certificate with the design calculations.
Common mistakes to avoid
- Buying a plot without checking the layout approval. An unapproved or unregularised plot cannot be approved until that is fixed.
- Drawings that ignore the rules. Setbacks, coverage, floor area and parking must comply before submission, or the application comes back.
- Skipping structural design because it is not submitted. The approval does not check your structure; the building itself will.
- Assuming the permit lasts forever. Plan construction within the five-year validity.
Sources
Tamil Nadu Combined Development and Building Rules, 2019 (Rules 5, 8, 14, 20, 51 and 52); amendments G.O. Ms. No. 69 of 2024 and G.O. Ms. No. 70 of 2024; G.O. Ms. No. 118 of 2025; G.O. Ms. No. 179 of 2026 and G.O. Ms. No. 180 of 2026; the single-window portal and its document checklist.
Planning a building and want the structure designed right from the start? Talk to our engineers.
Questions people ask
Who gives building plan approval in Tamil Nadu?
Inside the Chennai Metropolitan Area, planning permission comes from the CMDA or a local body it has delegated to; elsewhere, from the planning authority under the Directorate of Town and Country Planning (DTCP). The building permit is issued by the local body. Since October 2026, corporations and municipalities can approve residential buildings up to 1,500 sq m and 16 units, and town panchayats and rural local bodies up to 1,200 sq m and 12 units, up to 14 m high.
How long is a building permit valid in Tamil Nadu?
Under Rule 14 of the 2019 building rules, a building permit is valid for five years from the date of issue, and construction should be completed within that time. It can be extended once, for three years, if you apply before it expires.
Is a completion certificate needed for a house in Tamil Nadu?
Not for most houses. As amended in March 2024, Rule 20 exempts residential buildings up to 14 m high with no more than 8 dwelling units or 750 sq m. Larger buildings need a completion certificate before electricity, water and sewer connections are given.

Written by
Er. Venkadeshwaran Marimuthu
Founder & Managing Director
Founded Almino in Ramanathapuram in 2016. Leads one team of structural engineers, draughtsmen and estimators, so every home is designed to IS codes and priced with an itemised BOQ before work begins.
Related services:Structural design & drawings
Keep reading
All articles
Approvals22 Nov 2026 · 6 min read
Self-certification building approval in Tamil Nadu: who qualifies and what to check
Tamil Nadu lets owners of small houses get plan approval online, instantly, by certifying the plan themselves. Here is who qualifies, what the limits are, which documents you need, and why the structure still needs an engineer.
Read the article →
Approvals22 Nov 2026 · 8 min read
Structural stability certificate for schools, marriage halls and hospitals in Tamil Nadu
Schools, kalyana mandapams and hospitals hold large numbers of people, so licensing authorities often ask for a structural stability certificate. Here is what the engineer inspects, what to keep ready, and what happens if problems are found.
Read the article →
Approvals6 Oct 2026 · 6 min read
Structural stability certificate: when you need one and what the engineer checks
A structural stability certificate is an engineer’s signed statement that a building is designed or found fit to carry its loads. Here is when it is asked for, what gets checked, and why it should never be a formality.
Read the article →